找回密码
 注册

微信扫码登录

QQ登录

只需一步,快速开始

楼主: hanson8818

[器材介绍] powerslide新款到货拆解全过程!!一定要顶哦!

[复制链接]
发表于 2005-7-11 00:02 | 显示全部楼层

[em01]8.5的话1800多吧,其实算起来和c3和rb市场价差不多,呵呵。

http://rollerclub.ru/english/testdrive/CellPwSl.htm

Cell II FSK PowerSlide

The skates are cool, but very soft.
The UFS- frame has made a good impression on me: 251mm in the length, thick aluminium, looks strongly, 82 mm wheels can be put on all positions without problems.
Axes are situated almost in one line, as against FSK Hi-Low. «Almost ", because the first and third positions are higher on half-millimeter than 2-nd and 4-th. As though the frame was drilled manually and not very accurately. However this small discrepancy didn’t spoil the impression. So in one word, this skates are excellent replacement to Deflector’s and Thunder’s
carbon frames.
.Man.

Yesterday I was in RC and tried PowerSlide on there. And so, I liked this skates very much,
though all fans rigidly - кондовых FSK are spatting by poisonous saliva.
- The boot, certainly, is softer than FSK’s one, but is more rigid than at my favorite Core.
In my opinion they have very worthy amortization (I have jumped in the shop too, but as against Hottab hadn’t beaten off anything).
- Lateral support is good, the only thing, the boot is wide for my leg. But they ideally fit the arch.
- Lacing system is usual: the laces, a calcaneal belt, and buckles without pumping.
- The cuff is rather high and rigid; it appreciably pressed on muscles (this thing is the only minus of these skates). Thus the leg can bend forward quite free, that is very good for slalom
- The frame is short, strong by sight. However I still never managed to ruin particularly any frame, only to loosen and stir up. Probably I skate too little.
In whole I liked

回复 支持 反对

使用道具 举报

发表于 2005-7-11 01:03 | 显示全部楼层
84MM轮子大了点 for 平花
回复 支持 反对

使用道具 举报

发表于 2005-7-11 17:54 | 显示全部楼层
POWERSLIDE是哪里的品牌?????
回复 支持 反对

使用道具 举报

发表于 2005-7-11 21:14 | 显示全部楼层
德国的,84轮子是大了点,不知道换成香蕉轮回不会好一点呢,怎么上面的大哥还弄个英文评论,晕死了,还要点击才能看到[em06][em06]
回复 支持 反对

使用道具 举报

发表于 2005-7-12 07:17 | 显示全部楼层

感觉上是把低端的极限上鞋和休闲架子放在一起~~~平花肯定不舒服~轮子太大~鞋身太笨~架子不够结实~穿钉不够粗

回复 支持 反对

使用道具 举报

发表于 2005-7-12 07:43 | 显示全部楼层
没穿就别说那么多嘛。那么激动做什么。一直激动于PS的鞋子,可惜了囊中太过羞涩。
回复 支持 反对

使用道具 举报

发表于 2005-7-12 19:35 | 显示全部楼层
还有一款硬壳的不知道怎么样啊?
回复 支持 反对

使用道具 举报

发表于 2005-7-12 19:53 | 显示全部楼层
早穿过了!可以的!POWER SLIDE的品质
回复 支持 反对

使用道具 举报

发表于 2005-7-22 22:37 | 显示全部楼层
楼上早就穿过了???我在国内没有看到过那个硬壳的鞋子阿,难道是从香港那边弄来的?
回复 支持 反对

使用道具 举报

发表于 2005-7-23 07:12 | 显示全部楼层

听穿过的朋友讲,这鞋比休闲鞋还要软,架子又那么长,根本玩不了平花。

其实鞋的好坏,还是要对比才能知道。

从设计来看,这鞋是仿C3的,我们希望看到和C3的对比报告。

回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

QQ|关于我们|版权声明|手机版|小黑屋|联系我们|轮滑技术论坛 ( 粤ICP备11058637号 )

GMT+8, 2024-5-5 05:22 , Processed in 0.115573 second(s), 14 queries .

Powered by Discuz! X3.5 Licensed

© 2001-2024 Discuz! Team.